Parker

Parker MIG and TIG torch consumables - contact tips, nozzles, gas diffusers, liners and conductor tubes for Tweco, Tregaskiss, Bernard and Miller style guns, and collets, cups, back caps, torch bodies and complete torches for 9, 17, 20 and 26 series TIG torches.

MIG parts: match the gun series first

Tips, diffusers and nozzles are designed as a set for each gun style. A Tweco-style tip does not thread into a Tregaskiss-style diffuser. Identify the gun style and series, then the wire size. The stamped part number on the old part is the fastest way to match it.

• Liners - match length to the cable and the bore to the wire diameter. A worn or kinked liner is the most common cause of erratic wire feed.
• Conductor tubes and goosenecks - check the amperage rating and the bend angle for access.

TIG parts: two families

9 and 20 series torches share one family of collets and cups; 17, 18 and 26 series share another. Collets and collet bodies are sized to the tungsten diameter. A gas lens collet body gives a smoother, longer gas flow, so you can extend the tungsten further and still keep coverage.

Back caps come in long, medium and short. Short caps fit tight spaces; long caps carry long tungstens.

See MIG accessories and TIG accessories.

Parker parts by type: contact tips, MIG nozzles, gas diffusers, necks and liners, TIG torches, collets and gas lenses and gas cups and back caps.

Trade and volume pricing: call 905-919-1177 or email orders@mapindpro.com.

Counter pickup in North York.