ESAB PlasmARC Nozzle 70A (Pack of 5) – PT-32/PC-875/1125/1250/1500 Replacement
| QTY | Discount |
|---|---|
| 2+ | 3% |
| 10+ | 5% |
| 20+ | 7% |
ESAB PlasmARC Nozzle 70A (Pack of 5) – PT-32/PC-875/1125/1250/1500 Replacement
AMPERAGE 70A | PACK SIZE 5 | COMPATIBLE TORCHES PT-32, PC-875/1125/1250/1500 | TYPE Nozzle | BRAND ESAB |
The ESAB PlasmARC 70A Nozzle, part number 0558002618, is a high-quality consumable designed specifically for use with ESAB PT-32, PC-875, PC-1125, PC-1250, and PC-1500 torch models. Rated for 70A current, this nozzle is engineered for a range of plasma cutting applications. Sold in convenient packs of five, it ensures you have an ample supply on hand to minimize downtime and maintain consistent cutting performance. Order genuine ESAB 0558002618 nozzles from MapleWeld today.
Key Features
- Genuine ESAB replacement nozzle, part number 0558002618
- 70A current rating for a range of cutting applications
- Compatible with ESAB PT-32, PC-875, PC-1125, PC-1250, and PC-1500 torches
- Sold in packs of 5 to minimize downtime
- Helps maintain consistent plasma cutting performance
Technical Specifications
| Part Number | 0558002618 |
| Amperage Rating | 70A |
| Pack Quantity | 5 nozzles |
| Compatible Torches | PT-32, PC-875, PC-1125, PC-1250, PC-1500 |
| Brand | ESAB (Genuine OEM) |
Part Number & Size Reference
| MW0558002618 — PlasmARC Nozzle 70A, Pack of 5 |
Other Products
ESAB PT-32 Heat Shield 0558001957 | ESAB PT-32 Valve Pin 0558001959 | ESAB PlasmARC Electrodes PT-32 & PT-32LHS (Pack of 5)
Maple Industrial Products Inc.
Request a Quotation
Volume pricing, freight, and lead times for Canadian trade accounts. We reply within one business day.
Frequently Asked Questions
This nozzle is rated for a 50–70A range, not a single fixed amperage — it's commonly listed as the "50/70A" nozzle for ESAB's PlasmARC torches. If your cutting work sits within that band, this is the correct nozzle family to order.
It fits the PT-32 torch and is used across the ESAB PC-875, PC-1125, PC-1250, and PC-1500 plasma cutting packages.
Match the nozzle to the amperage setting you're actually cutting at. If most of your work is well below 50A, a lower-amperage nozzle (where available for your torch) will generally give a better-focused cut than running this nozzle under-amped.
Five per pack.
The nozzle constricts and directs the plasma arc as it exits the torch, which concentrates the arc's energy into a focused cutting stream. Its orifice size and condition directly affect kerf width and cut quality.
Watch for a visibly enlarged, irregular, or eroded orifice, a rougher or more angled cut edge, increased spatter, or a wandering arc. These are general signs of nozzle wear rather than a fixed hour-based schedule.
A worn nozzle can contribute to reduced arc focus, which may accelerate wear on the electrode since the two consumables shape the arc together. It's not a guaranteed cause-and-effect, but inspecting both together is good practice.
Not necessarily — they wear independently, so it's better to inspect each on its own condition rather than replacing both on a fixed schedule. Many shops do replace them together for convenience, but it isn't a technical requirement.
ESAB offers PT-32 nozzles at other amperage ratings for different material thicknesses — for example, a separate 40A nozzle is available for thinner material. 0558002618 covers the 50–70A range; if your work is primarily on thin material at lower amperage, a lower-rated nozzle may give a better result.
Yes, it's listed as compatible across PC-875, PC-1125, PC-1250, and PC-1500 in addition to the PT-32 torch itself.