Thermacut 120303 Plasma Deflector – Powermax 600/800/900 Replacement
| QTY | Discount |
|---|---|
| 2+ | 3% |
| 10+ | 5% |
| 20+ | 7% |
Thermacut 120303 Plasma Deflector – Powermax 600/800/900 Replacement
PART NUMBER 120303 | SYSTEMS Powermax® 600/800/900 | TORCHES PAC®123T/M & more | TYPE Deflector | BRAND Thermacut |
The Thermacut 120303 Deflector is a crucial consumable part designed for use with Hypertherm® Powermax® 600, Powermax® 800, and Powermax® 900 plasma cutting machines. This deflector works in conjunction with PAC®123T/M, PAC®121T/M/125T/M, and PAC®125T/M torches to direct the plasma gas efficiently, protecting other consumables and ensuring optimal cutting performance and extended torch life. Order a genuine-fit Thermacut 120303 deflector from MapleWeld today.
Key Features
- Genuine-fit replacement deflector for Hypertherm® Powermax® 600, 800, and 900 systems
- Works with PAC®123T/M, PAC®121T/M, and PAC®125T/M torches
- Directs plasma gas flow efficiently
- Protects other consumables from wear
- Helps extend overall torch life
Technical Specifications
| Part Number | 120303 |
| Component Type | Deflector |
| Compatible Systems | Powermax® 600, 800, 900 |
| Compatible Torches | PAC®123T/M, PAC®121T/M, PAC®125T/M |
| Brand | Thermacut (genuine-fit aftermarket) |
Part Number & Size Reference
| MW120303 — Deflector (Powermax® 600/800/900) |
Other Products
Thermacut 120826 Nozzle 40A (5-Pack) | Thermacut 120600 Retaining Cap | Thermacut 120576 Swirl Ring (2-Pack)
Maple Industrial Products Inc.
Request a Quotation
Volume pricing, freight, and lead times for Canadian trade accounts. We reply within one business day.
Frequently Asked Questions
It's a gas-flow component used in unshielded plasma cutting configurations on Powermax 600, 800, and 900 systems — for example, in gouging setups where no outer shield is used over the nozzle. It directs plasma gas flow within that specific unshielded consumable arrangement.
Powermax 600, Powermax 800, and Powermax 900 systems, used with PAC123T/M, PAC121T/M/125T/M, and PAC125T/M torches in an unshielded consumable configuration.
It means the torch is set up without an outer shield covering the nozzle — this configuration is typically used for gouging or specific cutting applications rather than standard shielded cutting. If your torch normally runs with a shield installed, you likely don't need this part; it's specific to unshielded setups.
Not in the same way — its documented role is directing gas flow within the unshielded consumable stack, not acting as a heat/spatter shield the way a shield component does on a shielded setup. Treat it as a gas-flow part rather than a shield substitute.
On a Powermax 600 unshielded/gouging configuration, it's typically used alongside a matched retaining cap (such as 120600), nozzle, electrode, and swirl ring (such as 120576) — all specific to that unshielded consumable arrangement.
This depends on your application — general cutting typically uses a shielded configuration, while gouging and certain specialty cuts use unshielded setups. Check your Powermax operator's manual for the consumable configuration recommended for your specific task before switching.
There's no manufacturer-stated fixed interval. Inspect it as part of your routine consumable check, particularly if you're troubleshooting inconsistent gas flow that isn't explained by nozzle or electrode wear.
Yes.
It's documented for Powermax 600, 800, and 900. If you're running a MAX-series machine, confirm the correct deflector part for that specific model rather than assuming cross-compatibility.
A shield covers and helps cool the nozzle during normal shielded cutting, while a deflector is part of the unshielded stack used for gouging-type work where no shield is present. They serve different configurations and aren't interchangeable — using the wrong one for your intended application can affect gas flow and cut results.